PoRelay8 Relay Extension Board with CAN Bus

The PoRelay8 Relay Extension Board with CAN Bus board allows expanding the number of outputs of the PoKeys device by using the PoExtBus. It features 8 relay outputs. Multiple boards can be daisy-chained with the use of a CAN bus for up to 80 additional outputs.

R1,212.27

SKU PoRelay8 Category
Share on facebook
Facebook
Share on email
Email
Share on whatsapp
WhatsApp
Share on pinterest
Pinterest

Description

PoRelay8 Relay Extension Board with CAN Bus

The PoRelay8 Relay Extension Board with CAN Bus board allows expanding the number of outputs of the PoKeys device by using the PoExtBus. It features 8 relay outputs. Multiple boards can be daisy-chained with the use of a CAN bus for up to 80 additional outputs.

PoRelay8 incorporates 8 electromechanical relays with terminals for NO, NC, and common relay contacts. There is one green LED for power supply indication and 8 additional LEDs for relay operation indications. The device can be mounted to a standard DIN rail using the DIN rail mount adapters.

The PoRelay8 is available in two options – with 12 V or 24 V relays.

Features

  • Up to 10 PoRelay8 boards can be daisy-chained from the single PoExtBus connector
  • 8 built-in electromechanical relays with NO, NC, and common contacts
  • 5 wires board to board ribbon cable to connect to master device or chaining
  • Improved reliability over original PoExtBusRe boards
  • Daisy-chaining over CAN bus, allowing greater distances between each board in the chain with much-improved noise immunity
  • Can be mounted to a DIN rail

 

Comparison: PoExtBusRE vs. PoRelay8

The PoRelay8 replaces the (now obsolete) PoExtBusRE output extension device. The PoRelay8 has the same physical dimensions as PoExtBusRE and features upgraded hardware to improve reliability and robustness to electrical noise.

Multiple PoRelay8 devices are chained together using industry-standard CAN bus instead of 5-pin PoExtBus cables. First PoRelay8 is still connected to PoKeys device using the PoExtBus (improved with the error detection in PoKeys57 series devices) and acts as a bridge between PoExtBus and CAN. The physical order of PoRelay8 devices is now decoupled from the logical order and easy setup of device output positions is done using the PoKeys application.